Table of Contents
How to transform the area under a utility sink in a laundry room, an ugly sink cabinet or a pedestal sink in a bathroom with a pretty sink skirt that also creates hidden storage at the same time.
Would you like to find a place in your home to create hidden storage that has easy access?
Or would you like to add some “pretty” to a plain piece of furniture or area in your home without having to do a major remodel or installation? How about a an easy way to make a skirted table in a room?
Here are a few DIY sink skirt ideas to help you do any of these in an easy way. Even if you don’t own a sewing machine.
I created hidden storage and added a bit of pretty when I made a fabric sink skirt for the functional, but plain utility sink in my mudroom.
Utility Sink: BEFORE Adding a Sink Skirt
I kept the cat litter box hidden under the sink and needed a way to hide it while still giving the cat easy access to it.
How I made a skirt to go around the bottom of the sink as a way to hide the cat litter box, but keeping it accessible for the cat.
How to Make a Sink Skirt
To make the no-sew version of this skirt – follow the no sew directions at the end of this post.
I made the skirt in two pieces so there is an opening in the front for easy storage access.
The decorative wood piece on the front of the tub:
I painted this decorative accent molding to match the tub and attached it with wood glue. I used caulk around it to make it look like it was molded to the tub.
- Sticky-back or sew-on Velcro also called hook and loop fastener
- Hot glue
- Tacky glue or any fast acting glue
- Straight pins
- Tape measure
- Iron and ironing board
- Optional: No Sew skirt – fabric glue and or Heat N’ Bond Fabric Adhesive
How To Determine Fabric Yardage for Sink Skirt
For height: Measure from the sink bottom or tabletop edge to the floor, add 2 inches to the measurement to create a finished top edge and bottom hem.
For width: Measure width of item or around item, add 2 inches for hems/finished edges. If you plan to pleat or gather the fabric, double the measurement. If you want the skirt to look very full, triple the width measurement.
If you need to seam fabric together to make one long piece of continuous fabric, add 2 more inches to allow for joining fabric together.
- If you plan on washing the skirt when it gets dirty – Wash fabric and dry before making the skirt to allow for shrinkage.
- Before cutting fabric: If your fabric has a pattern, make sure to line the pattern up on each section of fabric that will be joined or seamed together.
1. Cut fabric to height and width needed. Seam together cut sections of fabric to create skirt width needed.
2. Pin edges of seam together, then sew the edges together. Repeat for each seam needed to create one long width that will go around the item you are skirting.
3. Press seams open.
4. To create the top and bottom hems. Fold the top unfinished edge of fabric over 1/2-inch and press, Fold over another 1/2- inch and press again.
5. Place pins along edge. Repeat the process for bottom edge and both side edges of the fabric.
6. Sew along the pinned edges to create a finished edge/hem.
How to Create Pleats in the Skirt
- To create pleats: Starting from one end of the top edge of the skirt – tuck back 1-1/2” of fabric to make first pleat. Place a pin in to hold. Repeat the process all along fabric edge.
- Do not sew yet – wait until you finish the next step.
How To Attach Skirt to Sink
I attached the skirt to the outside of the sink using sticky-back Velcro. It makes it very easy to attach the skirt to any surface. I used my sewing machine to make the skirt, but you can also make it the no-sew way with fabric glue or fusible adhesive and an iron. (See these instructions at the end of this post.)
1. To attach the skirt to the sink, pin and sew one side of Velcro to the back side of the pinned top pleated edge. If using sticky back Velcro – I would add more glue or sew it just to make sure the Velcro stays attached.
2. Sew the Velcro on and the pleats in place using sewing machine. Remove pins.
3. Attach the other side of Velcro to the edge of the tub bottom or tabletop edge. Use tacky glue to make sure the Velcro is attached well. If using hot glue – use only a thin line of it. If you use too much the Velcro will not be flush with the surface.
Line up both sides of the Velcro and run your hand over it so that the skirt attaches.
The pattern runs vertically on the sink skirt. I pleated each of the skirts. I had more fabric for the sink, so there are more pleats. If pleats are not your thing, the fabric can be gathered or simply wrapped around the edge of the sink or table and attached with Velcro.
This Sink Skirt Can Also Be Made For:
- A bathroom pedestal sink.
- To hide the contents on shelves in open cabinets.
- Over a doorway that has no door.
- A sink vanity or vanity table.
- Under a kitchen sink.
- A round table skirt
- As an easy to make and hang window valance.
I used the same fabric pattern in another color to make a new skirt for my daughter’s vanity.
This is made in two pieces that come together in the middle so you can open the skirt to access storage under the table.
Here is a photo of the previous skirt. I added ribbon trim over on top of the pleats or gathers of the skirt as a decorative accent.
How To Make Sink or Skirt – No Sew
Follow the steps above, but where it calls for sewing, place a line of fabric glue or fusible adhesive.
Follow the manufacturer’s directions on the label of the product you are using for drying time. I also use an iron to help with adhesion.
When pleating – fabric glue is easier to use. Apply a dab between each fold of the pleat. As shown above.
When pinning, keep the pin to the side of the glue or use clothespins to hold each pleat in place. When glue is dry – the pins will not be glued into the pleats.
Use sticky back Velcro to attach the skirt to the item.
You May Also Like: